Business Line:  Molding Machines

Injection Molding Machine

MEIHO's Injection Molding Machine is ideal for you to develop or to try making new precision molded items or test new types of resin. Featured with its capability of molding with small amount of resin and its compact and light-weighted mold dies, our Injection Molding Machine effectively saves the trouble of set-up change. Therefore, our Injection Molding Machine is used as a necessary facility of micro-factories aiming for Just-In-Time, Type-Variable & Q'ty-Variable production of molded items.

Compact & Smart Molding Machine Ideal for Type-Variable & Q'ty-Variable production of molded items Compact & Smart Molding Machine Ideal for Type-Variable & Q'ty-Variable production of molded items Compact & Smart Molding Machine Ideal for Type-Variable & Q'ty-Variable production of molded items

Compact & Smart Molding Machine Ideal for Type-Variable & Q'ty-Variable production of molded items

Ultra-Compact Injection Molding Machine

Micro Series
(Micro-1, Micro-2, Micro-LIM)

  • Full-fledged Ultra Compact Injection Molding Machine both for trial molding and mass-production molding.
  • Setting area of its main body just takes size A4 (Micro-1).
  • Enables Precision Molding based on accurate measuring and weighing.
  • Enables molding of small amount of resin (about 100g). Ideal for testing special/expensive materials.
  • Enables very fine controlling, equipped with 3-Speed Level & 2-Pressure Level, Position/Pressure Switchover Controlling, In-Manifold Resin Pressure Sensor and other useful function units.
    *Resin-Pressure Sensor is optional.
  • Can be utilized for a wide range of purposes, from producing test samples at a lab to inline molding for single molded item.

*MEIHO's Ultra-Compact Injection Molding Machine is built to order. So, we would appreciate you in advance for your understanding on the lead-time we will need to take after we confirm your order.

LINE UP
  • Setting Area is as small as just A4 size.Amazingly Ultra-Compact

    Micro-1 Patented Technology
    Setting Area is as small as just A4 size.Amazingly Ultra-Compact

    • Main Specifications
    • Mold Clamping Force:1 ton
    • Dimensions:200 x 317 x 450mm(height)
    • Target Materials:
      Thermoplastic Resin
    • Drive:Motor, Air
    • Control:3 Speed Rates,
      2 Pressure Types,
      Position/Pressure
      Switchover Control, etc.
  • This is 2ton model designed for multi-purpose/usage

    Micro-2 Patented Technology
    This is 2ton model designed for multi-purpose/usage

    • Main Specifications
    • Mold Clamping Force:2 tons
    • Dimensions:495 x 530 x 915mm(height)
    • Target Materials:
      Thermoplastic Resin
    • Drive:Motor, Air
    • Control:3 Speed Rates,
      2 Pressure Types,
      Position/Pressure
      Switchover Control, etc.
  • This is ultra-compact molding machine designed for injection-molding of ultra-viscosity liquid resin

    Micro-LIM Patent pending
    This is ultra-compact molding machine designed for injection-molding of ultra-viscosity liquid resin

    • Main Specifications
    • Mold Clamping Force:1 ton
    • Dimensions:200 x 317 x 450mm(height)
    • Target Materials:
      Liquid Resin
    • Drive:Motor, Air
    • Control:3 Speed Rates,
      2 Pressure Types,
      Position/Pressure
      Switchover Control, etc.

Compact Injection Molding Machine

MIV Series
(MIV-15, MIV-20)

  • MEIHO's Injection Machine is compact in size designed for supplying you molded items Just-In-Time.
  • Compactly designed, this Compact Injection Molding Machine is ideal for being set up at low-ceiling factories and for making your molding line compact in size.
  • This molding machine is electricity- and air-driven, ideal for use in clean environment.
  • This molding machine adopts Vertical Mold Clamping/Vertical Injection system, enabling Insert Molding.
  • With this molding machine, MEIHO is ready to provide you with an integrated line from material-supply, molding, takeout of runners, secondary processing, inspection to packing into a container.

*MEIHO's Compact Injection Molding Machine is built to order. So, we would appreciate you in advance for your understanding on the lead-time we will need to take after we confirm your order.

LINE UP
  • Very Compact and Highly Productive, General-Purpose Molding Machine

    MIV-15
    Patented Molding Machine

    • Main Specifications
    • Mold Clamping Force:15 tons
    • Dimensions:850 x 1450 x 1800mm(height)
    • Target Materials:Liquid Resin
    • Drive:Motor, Air
    • Control:3 Speed Rates,
      2 Pressure Types,
      Position/Pressure
      Switchover Control, etc.
  • Very Compact. Reinforced Injection and Mold Clamping Forces

    MIV-20
    Patented Molding Machine

    • Main Specifications
    • Mold Clamping Force:20 tons
    • Dimensions:1290 x 1900 x 1900mm(height)
    • Target Materials:Liquid Resin
    • Drive:Motor, Air
    • Control:3 Speed Rates,
      2 Pressure Types,
      Position/Pressure
      Switchover Control, etc.

Compact Transfer Molding Machine for Hand Molding

ADM Series
(ADM-4 Open Type, ADM-4 Closed Type)

  • Enables Highly Accurate Mold Clamping & Injection thanks to its Power Servo.
  • Highly Compact in size. Its setting area has become much smaller for your convenience.
  • Mold die is compact in size, enabling easy set-up change. Ideal for Type-Variable & Q'ty Variable Production.
  • Totally power-driven, this molding machine needs no air, no water, no piping. No limit in usage areas.
  • Totally power-driven, this molding machine generates low noise and contributes to clean environment.

*MEIHO's Compact Injection Molding Machine is built to order. So, we would appreciate you in advance for your understanding on the lead-time we will need to take after we confirm your order.

LINE UP
  • MEIHO's Upper Transfer Type Molding Machine especially designed for handling Trial Molding

    ADM-4 (Upper Transfer Type)
    MEIHO's Upper Transfer Type Molding Machine especially designed for handling Trial Molding

    • Main Specifications
    • Mold Clamping Force:3.5 tons
    • Dimensions:700 x 700 x 1900mm(height)
    • Target Materials:
      Thermosetting Resin
    • Drive:Totally Power-Driven
    • Type:Upper Transfer
  • Lower Transfer Type

    ADM-4 (Lower Transfer Type)
    MEIHO's Lower Transfer Type Molding Machine especially designed for Mold Die in Lower Pot.

    • Main Specifications
    • Mold Clamping Force:3.5 tons
    • Dimensions:700 x 800 x 1450mm(height)
    • Target Materials:
      Thermosetting Resin
    • Drive:Totally Power-Driven
    • Type:Lower Transfer
Go to the Page Top